Follow these four steps to keep lawns and beds looking neat
As an interior designer, I’ve always known the importance of well-defined lines. Inside the house or out, a clean, smooth line provides a finished look and a sense of clarity to an area. In my garden, a razor-sharp edge serves as a stage that sets off the careful planning and maintenance I do. Such meticulous attention to detail doesn’t require a lot of work. I use four simple steps to create and freshen up my edges in spring, giving my beds the crisp lines that reflect the effort I put into my garden.
You're reading: How to Create Perfect Edges for Your Garden Beds and Borders
Step 1: Create (or re-create) an edge
The first step is to cut the edge. If you are creating a new bed, you’ll need to use a garden hose to mark your desired lines. If you are freshening up an existing bed, you can jump right in.
Method 1: The traditional way to do this is to use either a spade or a half-moon edger to move along the line you’ve set out. Neither tool does a great job of cutting curves, and it can be difficult to evaluate the course you’re taking as you move along.
Method 2: I use Black & Decker’s Edge Hog, a tool with a circular blade on wheels. I simply walk behind the tool as it rolls easily along, cutting a continuous 1½-inch-deep line into the soil. The wheels give the tool the mobility to make nice curves, and you can clearly see as you cut, making it easy to evaluate and revise the line of your bed. The edger sells for under $100, and it simplifies the daunting task of caring for my four-acre garden, with its 5,000 linear feet of edging.
Step 2: Remove the turf
Once you’ve established your edge, refine it with a spade, deepening the cut to 4 to 6 inches. If you are cutting a new bed, you also need to cut the turf on the inside of the bed with the spade. The loosened turf can then be removed easily by hand. The goal is to create an edge at a 90-degree angle.
Read more: 3 Simple DIY Soil Tests
Step 3: Hone the edge
I like my edges to be razor sharp, so I place hand shears vertically along the trench wall and cut any remaining grass blades from the edge. Care should be taken not to hold the shears horizontally to avoid destroying the right angle of the edge. I repeat this step two or three times during the growing season to keep my edges looking groomed.
Step 4: Mulch the bed
The final step is to put down 2 to 3 inches of mulch on the bed. The mulch not only suppresses weeds but also adds a rich, dark color to the edge. I mulch right up to the edge of the turf to create a gentle slope from the bottom of the edge to the top of the bed.
Get our latest tips, how-to articles, and instructional videos sent to your inbox.
The Secret to Fresh Cut Flowers
As summer sets in, gardeners start to think about cutting stems from our beds and borders to bring inside. Everyone loves to see a gorgeous vase of blooms sitting on…
Garden Photo of the Day
Stephanie’s Favorite Pollinators
Today we’re heading to Averill Park, New York, with Stephanie Stewart. These are shots of some of my favorite pollinators. The hummingbirds are attracted to salvia (Salvia guaranitica, Zone 7–10…
Read more: What does garden tool mean?
Podcast: Let’s Argue About Plants
Episode 92 : Favorite Plant Pairings
Peas and carrots. Peanut butter and jelly. Batman and Robin. If this was Jeopardy the correct answer would be, “What are perfect pairings.” On this episode we’re talking about two…
“As a recently identified gardening nut I have tried all the magazines and this one is head and shoulders above the pack.”
Giving Back Through Gardening: Part 2
Back in May, Fine Gardening committed to planning and planting a garden for Karen, an emergency department nurse. It was a small way to say thank you for the efforts…